Thanks to @StephenCook for the 3D print and @AndyAnderson for the ideas, I have gestated my new baby…
Next will be 2 dust collection improvements…
Thanks to @StephenCook for the 3D print and @AndyAnderson for the ideas, I have gestated my new baby…
Next will be 2 dust collection improvements…
What spindle is that?
Hitachi
https://www.amazon.com/gp/product/B0002ZZWX8/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1
With Muscle Chuck et al…
I just bought one of those as the Metabo branded from Lowe’s for 99. it is really quiet. Mine didn’t come with the plunge base though… figured to save the $$ on something I wont use anyways.
So is that whole mount 3d printed
Yes, the enclosure is 3D printed with this to mount it to the carriage
https://www.inventables.com/technologies/spindle-mounting-plate
If anyone needs one of those mounds let me know.
Also if you need one that fits a different plate I can redo the holes as well to accommodate it.
To add to this, Stephen was brilliant during the design process and fabbed the enclosure straight away…
thanks.
I actually started it prior to your decision. That way if you did decide it would be done faster.
I also made another before so it was not to hard to make this one. Past experience showed me that I need to consider reinforcement areas as well during the design. I didn’t want it to suffer cracking or other stress related issues.
I noticed in the specs the speed range goes all the way down to 8000RPM - was that the primary motivation for picking this router?
1/2 inch chuck. I have a toolbox full of 3/8 and 1/2 shank inch milling tools from a previous life, and a very special bowl making router bit. Oh…and I could…
How much for the mount and the plate
Thanks ARNOLD
Hello Stephen,
I am interested in the mount for the Hitachi. How much? Is the .stl file available? I could print it myself after I get my printer working again.
Thanks,
Trevin
Hi Adam,
What is the weight difference between the Dewalt 611 and this router? I could not find the specs with just the weight of the bare spindle anywhere…
Thanks,
Trevin
The hitachi is about 600 gms heavier, mine works very well…no issues
I can 3d print you one or get you the stl.
I charged $80 for the print out of ABS for the last one.
It costs about 5-8 dollars for shipping.