Hi RobertI have downloaded the file, and know where it isBut I can´t install it because the button is not highlighted
Hi boys and girlsI´m about to give up cry:I still don´t get my x-carve to talk with the AspireI must be a completely idiotI do not know what to do
Yes SirThe x-carve is working perfectly
Hey you are back! So easel and the xcarve play nice?
Is aspire working for you? Don't mind me it is late and I have nothing better to do but ramble on endlessly.I don't know how much progress you have made so I will assume all is well but I will continue on anyhowhere are some steps to try.1. create gcode with aspire 2. save gcode to a location on the computer3. open easel and import gcode4. if it imports to easel you will seethe cut path on the workspace I do not know what all software you have so I am going off of what I know you have access to.
Ok I have created a squareand saved it on the desktopas testNow what ? (please)
Hi RobertThat is absolute a great video for learning this, but......I do not have any option to choose in the boxIn the video they can scroll down to choose but I can´t, I wonder why.
Hi RobertUnder "My_PostP"is only one readme fileand a file X_Carve_mm
But there is another folder called PostPand there is lots of files in it
I can´t find any file with .nc at all
I´m to tired right nowCan I come back tomorrow and try again ?I have to get something in my stomach before I´llgo to bed
Can anyone of you helpful forum membersexplain why I got this message:
When I open the UGCS and type in the G92 X0 Y0 Z0 and press the entera message error says Grbl has not finished bootingPlease tell me what that means
Can you get a screen shot and upload it to here. Is the baud rate correctly set?
wait, I´ll get a picture
set the baud rate to the highest setting
I fixed it I changed the baud to 115200 andyipee it worked
You are a solid rock my friend
Finaly I can start experiment with cutting
a BIG thank´sKristian