Automatically Park Your X-carve In the Same Spot

Hi everyone, I’m ready a lot about cnc’ers setting their machines to automatically park their machines in a set position after every carve. It seems that it would be nice to have the x carriage move back and to the right or left to get it out of the way giving easy access to your part and the clamps. Can this be done with easel?

If you have homing switches installed you can use parking spot G28 and G30 to make the gantry move to these user-defined spots. The command is done in Easel Machine Inspector Console window.

In order to utilize G28/G30 consistently, homing cycle is a pre-requisite as this sync machine coordinates with model space.