Carving starting in the wrong spot

[LarryM]

First check for debris in the V-wheels or Makerslide,

If they are clean then, check here:

[Guide] Offset cutting, Lost steps, Positioning errors, etc

Positioning Errors One of the most asked about troubleshooting problems with a new X-carve is positioning errors. Almost all positioning errors are corrected by adjusting the various parts of the machine. Very few of the problems are actually due to failing components. The X-carve is a very flexible machine and so one answer cannot fit all situations. Each person will use their machine in a different way which makes it difficult to precisely quantify each adjustment. Positioning errors are alm…