Title may not be appropriate so I’ll explain. Several times when using an 1/8" bit you commonly run into thin spots on text or in a design that the program realizes are to small for the current but diameter.
I often would like the ability to disable this and allow it to make a pass to complete the design. My thought is that it currently sees a path that would be to narrow let’s say less than 1/8" so instead of not creating a path it would create a single path rounding up to the size of the but in this case 1/8".
When this happens with a “fill” shape, I’ve had pretty good luck copy/pasting the same shape directly on top of it and using that one as and inside “outline” cut.
