Thank you for handling the .tap file extention, tested and it works!
Today I migrated my SO2 to Estlcam. Working my way through the CNC controller settings I discovered the functionality.
Basic settings gave no problems
Spindle works too, your PWM has a higher frequency which may help in rpm smoothness
Inputs work like a charm
Homing is easier as you do not have to be in the proximity of the homing corner
Tool length works fine, the reference tool is close to the Z Probing, my probe is 19mm, plus the 1mm retract I lower the Z by 20mm to reach the surface of my material.
Touch plate, I have to fabricate something before I can use this, looks very useful
Keyboard, only at slow speed, is it correct that the keyboard jogging has no accellerator?
Gamepad (32 bit and 4.0 installed) works fine except the XYBA buttons, am I overlooking something?)
Webcam, I have no use for that at the moment
Everything is working like it should, not bad for a one day migration. Now it is time to go through the tutorials and start making some real products.