First thing is that you will need to correct post processor for Vcarve
Copy these three files into your My_PostP directory for Vcarve
You can find that directory by opening the file menu in Vcarve and then clicking the “Open Application Data Folder” button
easel.pp (3.0 KB)
X_Carve_inch.pp (3.9 KB)
X_Carve_mm.pp (3.9 KB)
Then you just pick the post processor you want when you save your toolpath.
Use the Ease PP if you want to import the gcode into Easel
Use either the mm or Inch PP if you want to use the Universal Gcode Sender to send the gcode to X-Carve