A work in progress:
A badge for a friend:
https://www.instagram.com/p/BJqYTCOhHQ4/?taken-by=jeremy.s.johnstone&hl=en
Tech details:
- Material: Cast aluminum (from an old removable hard drive sled) ~0.1" thick
- Feed: 15 IPM, Plunge: 5 IPM, DOC: 0.01",
- Total cut time: ~30 minutes
- Endmill was a 30 degree V bit 1/8" shank - I set Easel’s cutting diameter to 1/32"