Need some help with carvings

go to general setting/machine inspector

Console>$$and enter you should have your setting

1 Like

Ok, give me a second, thank you for all your support

1 Like

Ok, I managed to fix the machine , it’s running properly, however now I need to figure out the gcode for this project it’s been skipping sections or running course, any ideas?

https://easel.inventables.com/projects/bL_WtV-qCjD58Wdbfp-iUg

  • ok
  • $132=2000.000
  • $131=2000.000
  • $130=2000.000
  • $122=150.000
  • $121=150.000
  • $120=150.000
  • $112=500.000
  • $111=3500.000
  • $110=3500.000
  • $102=400.000
  • $101=80.000
  • $100=80.000
  • $32=0
  • $31=0
  • $30=1
  • $27=1.000
  • $26=250
  • $25=500.000
  • $24=25.000
  • $23=0
  • $22=0
  • $21=0
  • $20=0
  • $13=0
  • $12=0.002
  • $11=0.010
  • $10=115
  • $6=0
  • $5=0
  • $4=0
  • $3=0
  • $2=0
  • $1=255
  • $0=10
  • $$
  • ok
  • $132=2000.000
  • $131=2000.000
  • $130=2000.000
  • $122=150.000
  • $121=150.000
  • $120=150.000
  • $112=500.000
  • $111=3500.000
  • $110=3500.000
  • $102=400.000
  • $101=80.000
  • $100=80.000
  • $32=0
  • $31=0
  • $30=1
  • $27=1.000
  • $26=250
  • $25=500.000
  • $24=25.000
  • $23=0
  • $22=0
  • $21=0
  • $20=0
  • $13=0
  • $12=0.002
  • $11=0.010
  • $10=115
  • $6=0
  • $5=0
  • $4=0
  • $3=0
  • $2=0
  • $1=255
  • $0=10
  • ok
  • [OPT:V,15,128]
  • [VER:1.1h.20190830:]
  • $$
  • $I