Hope they payed well!
1 Like
Very beat idea! You should also include a few links on where to source the aluminum.
1 Like
why donât you make something along the lines of thisâŚ
http://midwestgamesupply.com/SKUs/dice_caliper.jpg
1 Like
(geeze man! Isnât it past your bedtime? 
)
For staining your cubes. work on 3 faces, wait an hour, rotate.
Well I hope that Philâs dice have the spots in the correct order, cuz the one in the picture is wrong.
Opposite sides of a die will always add up to 7
Nice idea for a holder though.
Never, ever, criticize The Philster!
1 Like
Your dice are right Phil. Nobody is saying your dice are wrong.
The picture that @DamnitJim linked has a dice that is wrong and thatâs what everyone is talking about.
1 Like
Damnit! You made me go back and look!! 
1 Like
Dying 
1 Like
@PhilJohnson have you order that brand of bit before? Just wondering about them since they are cheaper. The reviews on that particular bit are bad, but only because the people who ordered were mad and didnât pay attention to the shank sizeâŚ
1 Like
The most expensive bit I have it the whiteside bowl bit. The rest are in the $4-6 range. Just curious about it being a true V.
1 Like
Not yet, hoping to in January. Sonâs bday and then 2 1/2 weeks later Christmas, so Iâm getting that out of the way first, unless I get enough orders in the next couple months.
Phil,
I know youâve posted specifics (and a link) on the tapered bit you use, but I canât seem to find anything with the search toolâŚ(internet in the desert is awful)⌠could I trouble you to post it again?
After getting the small mm BN set of bits, I was thinking it would be cool to get a few larger ones so I have a full range and itâs easier than dealing with fractions. So⌠I ordered a set from Amazon.
Iâm so out of touch with actual sizes of mm that when they arrived, I realized what monsters some of them were. Shoot, the largest one would have trouble fitting in a 1/2" collet itâs so big. I seriously doubt Iâll be using them in any CNC work, but might come in handy for making pens.
Tapper? lol You either have an unrestrained spellchecker or are counting down the minutes to happy hour. 
Phil âThe Tapperâ Johnson. You have a new nickname.
I think I found a pic of PhilâŚ
1 Like
I got the surprise email from Vectric a month or so ago and snatched it up. It seems nice to me but I didnât know 8.5 well enough to notice many changes. I really enjoy the features tho, I find it easier to use than Easel. lol You can tell where I spend my time. The new version of UGS kind of frustrates me since Easel âcoercedâ me to upgrade to grbl 1.1. lol It will occasionally just error our in the middle of a carve saying it received an illegal instruction.
Is that a Killer Clown From Outer Space and Amelia Earheart meets Charles Lindbergh?
2 Likes
I like 1.1, but I use platform. The best is the speed override and integrated probing.
1 Like