Is that 1/8" or ¼" bamboo? Do you get it locally, or online?
.3" bamboo cutting boards from Wal-Mart… $3.96
That’s great to hear! Easily found and cheap!
cool project Phil. Just cut those 3 teeth off of each side and then it is good for those of us with a goatee
That’s What I did and I’m calling them picks
How well does the tape come off the waste board after its been super glued to the other tape on the back of the cutting board?
Same as it would if it weren’t superglued…
Its just masking tape, you’re not doing anything to its adhesive properties.
Cool. Wasn’t sure if the glue would actually soak in a bit and you’d have to sand off the paper or scrape it off. I’ll get around to trying it this weekend probably. Have a few orders to finish up from a couple days before Christmas that I told people would be after Christmas.
That’s why you use blue painters tape
Love the Eagle, how long did it take to design that?
Wow took me and hour to transfer a Seabee’s patch and get the gcode for it. I watched a utube video about how to do it. To bad I have Vcarve Pro and not aspire.
Best I have done so far did my 1st carve the 23rd.
I use vcarve desktop.
The U-tube video was done by tangeray69. He brought the Bitmap in then instead of tracing it he created a component. But like I said he was using Aspire I haven’t been able to find the option of creating a component under the modeling tab for the Pro addition. I have only been doing this less than a week so I could have missed it.
Import stl files.
I create stl files. I sell them. I also buy a ton of design and make projects.
Watch actual vectric tutorials from vectric.com
That’s where I started before I got the machine lots of good info here and there. One other thing I haven’t figured out is Coma’s and apostrophes in the text. just makes a big box. How much is that Eagle file? Thank you for all the great info Phill
That was purchased. I don’t remember from where. Lots of eagles out there.
I got that eagle from CNCvectorart.com $10. Maybe one of these days I can design my own. I just got the CNC to enhance my furniture builds and to play of course.
Eagle + plaque panels + text = 15 minutes
I really think you are over complicating it