Reconfigure the X-Controller

[EliasPolitis]

Regarding the second part, I bypassed the USB pigtail (which was giving me random connection problems) and routed a direct USB cable to the back.

Building B-Carve

Nope, the new USB cable was not enough. I had another disconnect. Bypassing the X-Controller’s USB pigtail did the trick. It seems I was not the only one. [image] I also took the opportunity to route the USB cable towards the back. All it took was filing a little notch on the top panel. [image] Rear Y plates. [image] 2 more to go.