Rhino + RhinoCAM: What post-processor?

[AbearDesign]

no.

it has a few commands that aren’t in easels database. However, there is a fix to be able to use easel by changing an option.

I made a full tutorial for rhinocam. Link below, I hope it helps.

Rhinocam guide

step 1. go to the following link and download the x-carve grbl post processor (right click and save as) step 2 locate your post processor files directory [image] [image] step 3 go to your post processor directory and place the downloaded file there. step 4 set your post processor by clicking post from machine setup, or post under machining job. [image] step 4 select the drop down by current post processor and select “X-carve GRBL” [image] step 5 press edit next to the “curren…