Gradually, as U can see in the pics I’m adding, it is a big rounded route, but it is moving gradually up (y axis), X and Z axis stay normal. I’ve already reviewed wires, could it be a belt problem,
what else could it be? voltage? Or may be I’m being agresive with speed rates?, it is a double blade - 6 mm bit flat cut, and these are the cutting settings (feed rate 609.6 mm/min . plunge rate 197 mm/min, depth pass 0.4mm), Before using the flat bit, I used a V bit, no problem at all) Thanks for your help
1 Like