I’ve decided to purchase a new router so I’m selling my used 1000mm X-Carve (2nd generation) with many upgrades & spare parts. I’m located in Austin, TX and I’m looking for a local cash sale.
The machine comes with upgrades such as a linear Z slider, automatic spindle control relay, dust shoe, and GT3 belts. These are good improvements that help this “hobby” machine cut more reliably at higher speeds. After these upgrades, I haven’t really had any issues with it and there are only a couple of small gouges on the left side of the waste board (from removing 2nd waste board on top). I just freshly planed down the waste board and it’s running great!
I will also provide a 30 minute training session and my current GRBL settings so you can have a tuned & ready-to-go machine when you get home. This saves a lot of time putting the machine together, calibrating it, and having to troubleshoot assembly issues.
Upgraded X-Carve Features:
-Plug & Play X-Controller with serial communication port. Simply connect a laptop and use free Easel software to run the machine.
-Dewalt DWP-611 router with automatic on/off function via Data Loggers outlet relay
-CNC4Newbie Z-axis slider for improved stiffness
-SuckIt Dust Shoe (Some damage, but it was repaired)
-GT3 belting with additional spare belts
-Automatic Z touch plate
-Files can be output from VCarve or other program into Easel but no additional software is provided with the machine.
-30"x30" cutting area with newly flattened waste board. **Note, there are some small areas of waste board damage that are roughly 3-4 inches in diameter. This does not affect the usability of this machine at all. A new waste board can easily be made out of 3/4" MDF or purchased from Inventables, if desired.
-Comes with some spare parts like belts, limit switch, Dewalt router brushes, etc. Not everything is pictured.
-Machine was purchased in April 2017.
-Laptop/computer & router bits are not included.
Let me know if you want any more info about it or pictures.