$$ settings

[MartinW.Mcclary]

There’s this. You’d have to change the settings for 750 or 1000 mm.

X-carve Grbl Default Settings - 500mm

I’ve been helping folks get their X-carve machines up and running. I’ve learned a lot. One of the things that I have noticed is that the grbl parameters seem to be inconsistent, especially when the Arduino has to be re-flashed. Long story short I wanted to find out exactly what the defaults should be. I took a new Arduino and used the EEPROM clear example program to clear the contents of the EEPROM (1024 locations), compiled the source code for Grbl 0.9j, downloaded to the Arduino, then ask fo…

Grbl default settings

ok so i tried running machine setup no luck , then i tried $RST=$ now my machine is really messed up, im trying to reflash grbl onto my xcontroll with arduino ide but im under the impression it doesnt reset the $$ values how can i get these values back to day one when i first set up my x-carve?

http://www.designsbyphil.com/x-carve-tips.html**strong text**