Smoke from xcontroller

[BrandonR_Parker]

There are many things that could lead to a driver chip releasing the magic smoke…

When you get the new one and install it, make sure you set your dip switches correctly…

Multiple depth carve

I’m having a hard time keeping zero when changing bits and adding or removing the dust boot. Everytime I change the bit it causes the drill to move. Even when adding or removing the dust boot, the drill will move. I have tried the switches inside that I was told by support would lock the motors but didn’t. I’m carving the first step with a 1/8 bit and the second with a 1/16 it’s always off after a bit change

{:0)

Brandon Parker