The build is on!

[ErikJenkins]

As long as you are at it, add a normally open button for Cycle Start, Pause and Reset.

I used these so I had a Green, Yellow and Red Illuminated switch.

http://www.amazon.com/gp/product/B00GLQVQ1Y?psc=1&redirect=true&ref_=oh_aui_search_detailpage

It's Alive

I have the new electronics enclosure all connected and in place! Everything is working and tested. Inside the enclosure I placed the relay for the Dewalt, the powersupply, Arduino and G-Shield. I reversed the Y-Axis drag chain so the wires exit the back of the machine. On the front of the enclosure are illuminated buttons for Cycle Start, Feed Hold and Reset. The red wire plugged into the top right is the probe. Also a power switch and Emergency Stop button. On the back (Switches are not p…