Hi all. I’m trying to control a Huanyang 1.5kW VFD and 800W spindle on my X-Carve from the X-Controller. I can confirm that the VFD will turn on and control the spindle - manually. I currently have the 0-10 spindle control on the Controller to the VI on the VFD, and the Ground on the controller to the ACM on the VFD. M3 and S commands in the Machine Inspector in Easel don’t seem to do anything. Machine settings are below. Any thoughts on what I’m missing??
Machine Settings:
Easel set to control spindle through hardware, 24V DC Spindle, and Default Spindle RPM @ 8000 rpm.
$0=10
$1=255
$2=0
$3=3
$4=0
$5=0
$6=0
$10=115
$11=0.010
$12=0.002
$13=0
$20=0
$21=0
$22=1
$23=3
$24=25.000
$25=750.000
$26=250
$27=1.000
$30=24,000
$31=0
$32=0
$100=39.900
$101=39.920
$102=188.413
$110=5000.000
$111=5000.000
$112=500.000
$120=100.000
$121=100.000
$122=20.000
$130=261.620
$131=279.400
$132=100.000
VFD Settings:
J1 VI/VR jumper: 1-2 for external control
PD00=1
PD002=1
PD003=400
PD004=400
PD005=400
PD006=3
PD007=0.5
PD008=120
PD009=7.5
PD010=4
PD011=120
PD014=1
PD015=1
PD070=0
PD072=400
PD073=120
PD141=110
PD142=7
PD143=2
PD144=3000