Two stage cuts

[AllenMassey]

I was seeing the same type of behavior on the detail pass. I posted a short video and description of the odd behavior in this link.

What seems like odd behavior from Easel on Detail cut

I was doing a two stage cut with a 1/4 rough bit and a 1/8 detail bit. The rough cut was perfect, performing exactly as I thought it would. But when I started the detail cut, the tool behavior was very different than anything I have seen before. The Easel project I was carving has lots of small holes all with a diameter greater than the 1/4 inch bit. The rough cut had cut all the holes and I expected the detail bit to only clean up the text that is also in the project. Instead the 1/8 inch …