That was quick, thank you!!
2 stage cuts is the bomb the motor lock is touchy i think it would be even better with a dro or something like it
i use a piece of paper to zero my bits
can i have access too please
Hi Jeff. I'd like this feature please. Will feedback on the good and bad.
We have noticed some issues with the motor lock/unlock buttons and we are looking into it. A temporary workaround seems to be jogging the machine one direction and then back after clicking the lock or unlock button.
@JayReynoldsIi, @RayKhan: You guys have access!
Please add me to the test group.Thanks
May I have access please
could you add me to the list as well please
@HarryStacey, @RussellTurley, @AaronLowe: You guys have access!
Could I be added to the list as well please? Thank You!
@RussellTurley: You have access.
Is it possible to trick it to do 3 passes or more. For example 1st pass with a 1/4 inch bit the 2nd pass with 1/8 bit. The when u run it again say your 1st pass was with the 1/8inch bit and use a smaller bit for the finishing
And I wanna say I really love the 2 stage cuts. It really cuts down on the time it takes to do the project. You guys are doing a great job updating and improving the software
Can you please give me access to the two-stage cutting feature?Thanks, NC
You could try doing that. It might work, but I haven't tried it. Would be interested in hearing how it works.
Would you be able to set the cuts as the first and second in Easel, have it cut the first size, then go back for the finishing cut as normal, then set up a another second cut. Set your second cut to be your first? If you follow what I mean?