Using Easel to design drawings for a Pen Plotter

[RayMacke]

Here is what I did.

Foam Board / Marking Pen Sign

Needed a cheap sign for a community Halloween party. Used a 20" x 30" x 1/4" sheet of foam board from WalMart and a couple permanent markers. The black was done with a fairly sharp pointed pen type marker - not extra fine but more so than the normal pointed marker. Set it as a 1/32" bit running 150 ipm. Took about an hour for all the black but there is a lot of detail in the popcorn at the top. The red was with a blunter pointed Sharpie (seen in photo). Tried it as a 1/16 bit but didn’t get 1…