The latest versions of Vectric’s VCarve, Cut2D and Aspire (v9.5xx and later) all include an optional gcode sender called VTransfer, which you can select when you first install the product. This is a deliberately minimal app, but provides basic connection, homing, jogging, origin set-up and, of course, toolpath streaming to your X-Carve. It works best if you are running VCarve on the same machine that your X-Carve is connected to because then you can use the Output direct to machine option when you choose the X-Carve (mm)(*.gcode) post. With this option checked, VCarve will transfer the toolpath directly to VTransfer without the need to save and load toolpath files on your PC.
We hope that this will help to plug the gap between toolpath creation and streaming to your X-Carve - particularly for those of you without an internet connection.
Cheers,
E
PS. Full disclosure: In case I didn’t make it clear, I do work for Vectric!