Continuing the discussion from J Tech Laser integrated with X-carve grbl (Inventables/Master version 1.0c)
This is a version of grbl that supports both spindle and laser based on the grbl 1.0c version from Inventables. It contains the modifications that were done by Nick Williams to produce the grbl version 0.9g from J Tech as well as some optimizations that I included for the laser functions.
Thanks to Jeff @picengravertoo and John @JohnChamplain for their help in testing this new version.
There are two build versions. The first version (release 11/12/2016) is the base version for spindle and laser. The second version (release 9/1/2017) is a modification of the first release to change the Dwell (G4) to allow smaller increments for Dwell. The first version uses the standard 50ms floor with 50ms steps and the second version uses a 1ms floor and 1ms steps.
9/1/2017 - added version with Dwell change
10/12/2016 - update (bug fix) ghosting
9/28/2016 - original release
First time users - you really need to read the readme.pdf
Xcarve_JTech_grbl_11_12_2016.zip (90.1 KB)
Xcarve_JTech_grbl_9_1_2017.zip (89.9 KB)
For PicSender users: (Includes setup information for using PicSender with this version of grbl)