Adding drill bits to the Easel bits dropdown menu

[HaldorLonningdal]

For 3mm holes use for instance a 2mm end mill.

Or use a 3rd party software / app for genreating g-code:

Peck Drilling In Grbl - Script Included

This weekend I needed to peck drill several holes with my Xcarve. Since grbl cannot interpret G83 peck instructions I wrote a quick script that converts the G83 to grlbl accepted commands. I successfully used it with my Xcarve to drill >50 0.09" holes into 5/8 Aluminum. I’ve placed it on github G83_to_grbl, please pass along any comments or suggestions. I suggest using something like OpenSCAM to simulate your code before trying it on your machine.