Hi
I’am developing a transforming an stl into g-code and want to take advantage of two-stage carving with differents bits
In order to do so and optimize timings i would like to know what are the recommended figures when carving on pine wood
Basically I’m interested on
- How deep each iteration can carve
- Reccommended feed rate
- Recommended pause times
Thanks
<
inch 1/32" 1/16" , 1/8” 3/16” 1/4"
cm 0.079375 0.15875 0.3175 0.47625 0.635
vertical step
feed rate
pause rate
`