Compensate for Kerf

Easel Cabinetmaker
1

My workflow is already setup to compensate for kerf on my track saw cuts. I am making some cabinets for the living room and I laid it all out in the cabinetmaker, and specified my kerf as 1.8.

On the cut list, all of my measurements are listed, but the measurements seem vastly different than what they should in order to line up with the total measurements.

Is the kerf already compensated for on a cultist? If a cut lis listed at 990.4mm, am I looking to have a final piece with that measurement, or do I subtract the kerf?

Thank you

2

I played around a bit and it seems kerf only exists for nesting purposes. So the dimensions listed in the cut list should be the final dimensions of the piece.

When looking at the cut list on the computer, it provides a summary of the parts you’ll make with a panel and their final dimensions….that is not there when printed, thus the confusion.

If anyone knows if I’m right or wrong, let me know.