Different bits

I have these bits i want to use. Is there anyway to get the to fit into the x-carve? They are loose. WIN_20180327_13_07_46_Pro

don’t do it! :see_no_evil:

ok lol

They maybe 6mm shaft rather than 1/4". You probably can buy a 6mm collet for your router. Take a look here -

That bit is a metal burr bit, used to remove sharp edges (grind) on sheet metal etc. Not suitable for CNC as the bit is not designed to carve.

1 Like

Guess it depends on what you are trying to accomplish. Shane Bell messed with burrs cutting harden steel. Here is a link - https://discuss.inventables.com/t/using-carbide-burr-test-cut/21939/8