Fusion360 G-Code to Easel - Model not centered anymore in Easel and cuts off center

[CorbinElliot]

@NeilFerreri1

If you zero in the center, it will always work.

That said, in your picture of the endmill zeroed above the corner, it definitely appears as though the endmill is inside the corner. The center of the endmill needs to be centered above the corner.

@SethCNC

And exactly what Neil said as well…
If you do use corner alignemnt the bit needs to be centered direcly above the corner,.
Like the center of the bit directly above the center of the imaginary cross made by the 2 edges.

Sorry was busy with some other projects recently. Did another test making the changes you guys suggested, i.e. - centering the end mill bit directly over the corner and not inside the corner area.

Well it appears this solved my issue and seems to be cutting almost 100% centered! Thank you very much guys I really appreciate all the feedback, information and help!