Any thoughts from the hive? My first problem since I bought the xcarve exactly 1 year ago. Machine stopped in the middle of a carve.
I was in the middle of a job when the machine just stopped. I use a relay for the router and vacuum which also shut off as soon as the issue started. USB connection appeared to remain in tact.
Ive already hard power reset the controller and no difference. I cannot jog X/Y/Z nor start a new job.
The below error is displayed in machine inspector which looks like the controller is not responding to instructions. Although, it is still capable of sending output to my PC via USB as shown in the status which is looping the alarms shown below.
alarm - ALARM:9
?
<Alarm|MPos:0.000,0.000,0.000|Bf:15,128|FS:0,0|Pn:P>
?
<Alarm|MPos:0.000,0.000,0.000|Bf:15,128|FS:0,0|Pn:P>
?
<Alarm|MPos:0.000,0.000,0.000|Bf:15,128|FS:0,0|Pn:P|Ov:100,100,100>
?
<Alarm|MPos:0.000,0.000,0.000|Bf:15,128|FS:0,0|Pn:P|WCO:-666.354,-635.109,-125.307>