Hi
I’m fairly new to CNC and have as Masuter Pro and am using Easel. Machine and easel were working well bu from yesterday I cannot carve. I can home machine, jog x, y, z axis, I can set job start position all works well umtil I press the carve button. Machine does not move. No error appears in Easel.
I have tried setting up machine with various Fox Alien options and ‘other machine’ but all do the same.
I have tested limit switches and they are all good. I suspect it is a GRBL issue but I dont have the knowledge to know.
Here are the settings as taken from Easel.
Settings
$0=10
$1=255
$2=0
$3=0
$4=0
$5=0
$6=0
$10=115
$11=0.020
$12=0.002
$13=0
$20=1
$21=1
$22=1
$23=3
$24=25.000
$25=750.000
$26=250
$27=1.000
$30=30000
$31=0
$32=0
$100=80.418
$101=75.188
$102=1677.140
$110=1800.000
$111=1800.000
$112=600.000
$120=30.000
$121=30.000
$122=15.000
$130=235.000
$131=185.000
$132=100.000
Any help is greatly appreciated.