I just did the Clamp Set from the projects library. I set holes width and height at 0.330 and it cut 0.286. I also had groves of 0.220 and it cut 0.156. Finally the Piece was suppose to be 1" and it cut 0.924. I’ve done the power tuning, I checked the step/mm test, squared the X, Y and Z. Lastly, I…

My Account

Log Out

Measurement not matching cut piece

JeremyJohnstone December 7, 2015, 2:56pm 7

There are instruction in the GRBL github and wiki on how to upgrade the arduino firmware to the latest version.