X-Controller hex file

[RonSabourin]

Ken,

Check out the post below… the file is attached in zip…

Probe failure bug

Easy way: Download the hex file listed above and extract it to any folder. Download XLoader (http://xloader.russemotto.com/xloader.zip). Extract Xloader and run it. In Xloader, Select the hex file from 1 above. Select Uno for device Select correct com port Baud rate is 115200. Click Upload. Message will display that it is uploading and will display number of bytes uploaded when upload is successful. Turn off power to X-Controller, wait 10 secs., turn it back on. Run Easel setup again.

grbl_10c_hex.zip (29.7 KB)

And the XLoader in zip file as well

XLoader.zip (678.3 KB)