Greetings I setup my Xcarve and while testing the motors it worked then stopped. Used the machine inspector and under status I saw multiple alarms. Can anyone help?
· ?
· <Alarm|MPos:0.000,0.000,0.000|Bf:15,128|FS:0,0|WCO:-723.600,-723.600,-64.500>
· ?
· <Alarm|MPos:0.000,0.000,0.000|Bf:15,128|FS:0,0>
· ?
· <Alarm|MPos:0.000,0.000,0.000|Bf:15,128|FS:0,0>
· ?
· <Alarm|MPos:0.000,0.000,0.000|Bf:15,128|FS:0,0>
· ?
· <Alarm|MPos:0.000,0.000,0.000|Bf:15,128|FS:0,0>
· ?
· <Alarm|MPos:0.000,0.000,0.000|Bf:15,128|FS:0,0>
· ?
· <Alarm|MPos:0.000,0.000,0.000|Bf:15,128|FS:0,0>
· ?
· <Alarm|MPos:0.000,0.000,0.000|Bf:15,128|FS:0,0>