Easel does not recognize the Z-Probe any longer. It was working the last time I used it (1 1/2 years ago). Now, when I go through the process of beginning to carve it already thinks that the Z-Probe is connected when it isn’t even plugged in. I connect the clip to the collet and touch the bit and it does not recognize it. I tested EVERYTHING, the wires are good, all connections are good. I took apart the controller box and unplugged/replugged everything. I inspected the motherboard for any burnt connections/diodes/anything. Nothing is out of the ordinary. My machine is pre November 2021. I have uninstalled/reinstalled the machine in Easel, I have updated everything as well and still the same outcome. Please help! The only thing I can think of is possibly replacing the motherboard but I don’t think that is the problem