Cannot combine

[JeffStrauser]

my project will not combine the cuts. not sure why this is not working anymore but when i try to combine the words with a circle it just shows the circle

[SteveMoloney]

Cn you share your project? this might help as well

Monogram / Door Hanger / Fatten Type

I get a lot of questions on how to do this, see pictures below. Fatten Type You can use the Offsetter app to Fatten type. After you fatten it select all and fill. Then you will need to set the areas to either full depth or zero depth and then re-combine [1] Monogram / Door Hanger Remember once you set your outline you can control it somewhat on how it cuts by choosing, inside, outside or on path. Tabs are your friend with these I use one to two of them in every waste area. [IMG_3262] [IMG…

[SethCNC]

Jeff Combining Text with other vectors shapes. (Do Not Publish)

[JeffStrauser]

https://easel.inventables.com/projects/MCR7fAxKmBjIPXNwf-FVGA

here is my project i cannot combine the text to the circle.

[JeffStrauser]

for some reason i was able to combine the dot above the I but not the text to outer ring.

[RussellCrawford]

Set the 2 circles to fill, then set the inside circle depth to zero and the outside circle to a depth greater than zero, then you can select everything and combine
Russell

Copy of Untitled

[JeffStrauser]

I don’t have an option to set to fill. Do I need easel pro to have that option?

[RussellCrawford]

No you dont need Easel Pro, I’m sorry Clear out a pocket is the correct term, the first one on the Cut Path tab

[JeffStrauser]

Thank you, That worked! Seems like its a way harder process than I have done before.