Hello there! I would love to use gcode in easel. Can I be activated as a tester? Thankyouuu!
@BrianAlbury @MichaelGrigg @NathanArgetsinger Open Sesame!
1 Like
Awesome Thanks!
I know I am late to this “was gone on Christmas break” anyway I could test this out in my classroom?
Just started using our X-carve and planed on using Fusion 360 but so far not fond of UGS and would love to give this a try.
@Brandon1 @PeterHanse Never too late to join the party!
Can I get that feature? 
I wna try to test my laser using easel
I really want to test this out!!!
Sign me up!
I would love to try this as well I have not yet been able to get a good carve from aspire > UGS always an issue with my Z Axis…
Easel just seems to work
I’d like to try it as well, I’m using MasterCam. Thank you in advance.
This would be a huge help, I design in solidworks and still looking for a good software interface to work with grbl and g-code directly.
Please add me as well. Thanks.
Please add me to the list.
-Larry
@Hugo @Tactical_Panda @BrentDoughty @JoshuaThornton @DV1 @EvanDurling @ChristopherWhite @LarryJacobson your wish is our G1 command. Little G-Code humor there.
You’re all good to go. Refresh and go to the file menu in Easel.
Me too please! I am in for anything PCB related!
Donezo @RylandMueller if you figure out a nice PCB tool chain with this g-code import feature please post back and let everyone know. There has been a lot of interest but I haven’t seen someone document their tool chain yet.
@Zach_Kaplan I use Eagle -> FlatCam -> ChiliPeppr, but I would use Easel if it had FlatCam gcode support. I am clueless about post-processors, so I can’t help with that. I am also having trouble with feeds and speeds for the Inventables PCB milling bits. I might try going with a different CAM program if I can’t find a solution with FlatCam.
I have a question for alignment of project with imported GCode… I am using Vectric Aspire
Here is the project in Aspire, Tried to align it at 0,0.
Then here is Gcode in Easel, it seems to align it very far away from 0,0…
Is there a way to bring these cuts closer to 0,0 on Easel?
Edit: Re sizing dimensions of project area in Aspire fixed this.
Oh yes please could I also try this out I use v carve pro now.