Sign project

[DanielJones2]

I was wondering how to make this type project in easel

[WayneHall]

Steve just posted how to make those a few days ago. Search monagram/door hanger/fatten type and you should find it.

[JosephFusari]

Wayne, Can you point me in the right direction? I search through your posts and the keywords but came up short. Did you post it to inventables?

[LucFournier]

It was not from Wayne, it was from Steve

Monogram / Door Hanger / Fatten Type

I get a lot of questions on how to do this, see pictures below. Fatten Type You can use the Offsetter app to Fatten type. After you fatten it select all and fill. Then you will need to set the areas to either full depth or zero depth and then re-combine [1] Monogram / Door Hanger Remember once you set your outline you can control it somewhat on how it cuts by choosing, inside, outside or on path. Tabs are your friend with these I use one to two of them in every waste area. [IMG_3262] [IMG…

[JosephFusari]

Thanks, that explains why i couldn’t find it.

[DanielJones2]

Thank you for your help. I have tried figuring it out in my own and couldn’t but that’s what I like about this community everyone is always willing to help out.