[Solved!] X carve cutting the right shape, but in the wrong location

X-Carve Troubleshooting
18

@Zach_Kaplan it’s likely.

@WilliamPaukert can you please try the following:

  1. Close all programs that might be trying to connect with your Arduino (Easel, Universal G Code Sender etc.)

  2. Open the Arduino IDE

  3. Go to File - Examples - EEPROM - eeprom_clear

  4. Make sure the number that this pink arrow is pointing to is 1024 and NOT 512

4020c9a0d46772b8403dc9de31cd1db72433276677ac.png1920×1080

  1. Click the arrow in the top left of the IDE

  2. Once the sketch has uploaded close the IDE and open X Loader

  3. Upload the hex file, be sure the baud rate is set to 115200

  4. Close X loader and open Universal G Code Sender

  5. Type $$ and paste the results into this thread

1 Like