There are a lot of repeated questions and answers on here, and some good videos that explain everything. I’ve got 2 maintenance and one X-axis stiffening video that I made that may help with some X-Carve maintenance and troubleshooting. Since a picture is worth a thousand words, videos have got to…

X-Carve Maintenance/Troubleshooting Videos - Add Your Own!

RobertA_Rieke September 20, 2015, 10:41pm 4

And, here’s the last video of mine this weekend. A guide to adjusting potentiometers, hopefully it’s not too confusing.

33 Likes

Z-Axis consistently cuts the wrong depth

Z axis calibration question

(SOLVED) 1/4 in jump off path

Y-Axis shifting

Nema 23 Current setup

Not carving correctly—paths offset

Need Some Assistance Please

G Code Error from Easel?

XCarve stops randomly

X-Carve Moves the home position

Losing steps at same place every time

Machine crashed, now missing steps intermittently

Not following path when carving using pocket function

3D miss cuts

Solved - Route path is moving up gradually

SERIOUSLY weird 'slipping' issue - need help fast

Cannot clear gshield after and alarm

How to engrave small lettering with the X-carve?

X axis motor stop for few seconds mid job

Extremely frustrated with my machine

A few issues with x-carve looking for help

My 3D model had wrong cut

Circles arent round

Cuts are moving in both X and Y axis each pass

X- axis binds every 3-4 inches, not sure why

Y axis stepper motors stop on long movements

Cant test xcarve through easel

Accuracy seems to be an issue

Bunny coat hanger

Outline vs Fill results a little confusing - 1st time user

X axis chatter / resistance

First Real Carve (...& Fail)

Cannot get my X-Carve started!